The conceptual formulation for this project was to modify a PAR lamp measurement setup for the company Amglo Kemlite Laboratories, Inc based in the USA, Florida. It was to factor in that the old holding should be used and that the modified setup is controlled by a PC. Further it was required that the detector shows the values of the peak luminous intensity in candela and the beam angle in degree. The resolution of the measured values should be two degrees or better.

This problem was solved by using of the morphological analysis.

Under consideration of the conceptual the modification of the measurement equipment is finished. It was carried out some measurements in order to check the equipment. But in order to know how big the measurement error is it is necessary to do some comparison with another light laboratory. Further it is necessary to coat the walls (expect for the reflection wall) in a black not reflected color so that the measurement error is smaller. This both tasks were communicated to the supervisor because it was not done.